Are you tired of your PS4 controller not working properly? Do you want to learn how to fix it yourself?
In this article, we will show you how to take apart your PS4 controller step by step. With just a few tools and materials, you can easily remove the controller shell, disassemble the button and trigger components, and even access and replace the analog stick.
After that, choose Controller Calibration and adhere to the on-screen directions.
So, grab your controller and let’s get started!
Tools And Materials Required
To take apart your PS4 controller, you’ll need a few tools and materials.
First, you’ll need a small Phillips head screwdriver to remove the screws that hold the controller together. Make sure it’s the right size to avoid damaging the screws or the controller.
Additionally, you’ll need a plastic prying tool or a flathead screwdriver with a thin edge to carefully separate the different parts of the controller without causing any scratches or damage.
It’s important to have a clean and well-lit workspace to make the process easier.
Finally, you’ll need a container to keep the screws and small parts organized so you don’t lose anything.
With these tools and materials on hand, you’ll be ready to start disassembling your PS4 controller.
Removing The Controller Shell
Start by removing the screws that hold the shell of the PS4 controller together. Use a small Phillips head screwdriver to carefully unscrew the four screws located on the back of the controller.
Once the screws are removed, gently pry open the shell using a plastic opening tool or your fingers. Be careful not to force it open, as this could damage the internal components. Slowly work your way around the edges, releasing the clips that hold the shell in place. Take your time and be patient.
Once all the clips are released, you can separate the two halves of the controller shell.
Congratulations! You have successfully removed the controller shell and are now ready to access the internal components for further modifications or repairs.
Disassembling the Button and Trigger Components
Once you’ve removed the screws, gently pry open the controller shell to access the button and trigger components. Take your time and be careful not to damage any of the delicate parts inside.
The buttons and triggers are connected to the circuit board by small cables, so you’ll need to disconnect them before fully removing the components. Use a pair of tweezers or a small flathead screwdriver to carefully lift the connectors and detach them from the circuit board.
Once the buttons and triggers are disconnected, you can easily lift them out of the controller shell. Remember to keep track of where each component goes so you can reassemble everything correctly later on.
Don’t worry if rubbing alcohol gets stuck inside the button gap—it will eventually evaporate.[5]X Research sourceUse a toothpick to get dirt that your cotton swab can’t reach.
Accessing And Replacing The Analog Stick
Now, carefully remove the screws holding the analog stick in place and gently lift it out of the controller shell.
The analog stick is a crucial component of your PS4 controller, responsible for precise movements in games.
To access and replace it, you need to follow a few simple steps. Once you have removed the screws, you will notice that the analog stick is connected to the controller’s circuit board by a small ribbon cable.
Lightly dampen a microfiber cloth with the mixture, then wipe the entire controller down with it.
Be cautious while detaching the ribbon cable to avoid any damage.
Next, take your replacement analog stick and connect it to the circuit board using the ribbon cable. Secure it in place with the screws you removed earlier.
With the new analog stick installed, you can now reassemble your PS4 controller and enjoy improved control during your gaming sessions.
Putting the Controller Back Together
To complete the reassembly process, carefully align the controller shell and press it firmly together until it snaps back into place.
Make sure all the internal components, such as the buttons and circuit boards, are properly seated before closing the shell.
Pay attention to the alignment of the shell, ensuring that all the buttons and triggers are aligned correctly with their respective openings.
Once aligned, apply even pressure to the shell, starting from one side and working your way around until you hear a satisfying snap. Be gentle yet firm, as excessive force could damage the controller.
After the shell is snapped back into place, give it a little shake to make sure everything is secure.
Trigger Button
As you’re cleaning the bases, move the stick around to expose more of them for a complete clean.[6]X Research source Use a toothpick to get under the lip on the controller where it connects to the sticks.Switch to a clean cotton swab in between analog sticks. 7Clean inside the gaps of the trigger buttons.Loosen dirt inside the gaps by gently pulling it out with a toothpick.
Afterward, use a new cotton swab with rubbing alcohol to clean all the way around the gaps in face of the trigger buttons.[7]X Research source Don’t push the toothpick into the gaps past the tip. 8Scrape all the way around the touch pad.Shimmy out any dirt that is stuck in the gap with a toothpick.
Controller Port
Be careful not to twist the toothpick too roughly.To avoid damaging the insides of your controller, don’t insert the toothpick past its tip. 12Clean the controller ports using a cotton swab dipped in rubbing alcohol.After dabbing the swab in alcohol, twist the cotton swab into the headphone jack.
Circular Button
The little rubber pieces on the back of the circular buttons and D-pad, make sure when you put them back, they have the metal part facing away from the buttons.
Congratulations, you have successfully put your PS4 controller back together!
Frequently Asked Questions
Yes, you can use any type of screwdriver to remove the screws on the PS4 controller. Just make sure it fits properly and is the right size for the screws.
To clean the button and trigger components after disassembling them, gently wipe them with a soft cloth or use compressed air to remove any dust or debris.
Lift out the controllers buttons and joysticks.5.
Yes, it’s possible to replace the analog stick with a different type or brand.
Yes, you can use any type of lubricant when replacing the analog stick. Just make sure to choose one that is safe for electronic components and won’t damage the controller.
Conclusion
Overall, taking apart a PS4 controller is a relatively straightforward process that can be accomplished with a few basic tools and some patience. By following the steps outlined in this article, you can easily remove the controller shell, disassemble the button and trigger components, and access and replace the analog stick if needed.
Once all the necessary repairs or modifications have been made, you can put the controller back together and enjoy using it for your gaming needs.
